INTRODUCTION
For installations in seaside areas and outdoor applications where the air is highly humid and corrosive, Stainless Steel Valves are recommended which provide elevated surface protection against corrosion. These valves are also recommended in applications where regular surface treatment is carried out to prevent fungal and bacterial growth.
The Manik MHPSCV-SS Valves have been specially design for such applications.
MHPSCV-SS is a combination stop valve and normally-spring-closed check valve. Whereas MHPCV-SS is a simple angle-type check valve. Both of these are available in an angle way only. Valves open wide for full flow in the arrow's direction on the valve body and promptly reset when reverse flow occurs. Optimum opening characteristics are attained due to Precisely Cut Ports. Primary characteristics of these valves include efficient functioning at low differential pressure,easy inspection and maintenance. These valves have stainless steel stems with back seating for seal replacement under working conditions. The internal design minimizes pulsations.
DESIGN FEATURES
- Maximum working pressure: 150 Bar g (1160 psi g)
- Fluid temperature range: -60°C to + 150°C (–76°F to 302°F)
- Application: Ammonia, Fluorocarbons, Carbon Dioxide
- Material: Body: CF8 Cast Stainless Steel Body
- Internals: SS304
- Seat: PTFE
- Connections: DN-15-40 – Socket/Butt Weld
- DN 50-125 – Butt Weld.
- Reliable Back Seating.
