|
Automatic Gas Purger For Refrigeration Plant Type SGP-2E
The Automatic Gas Purger For Refrigeration Plant has a built in heat exchanger connected to the liquid line from the receiver or the pump discharge line on the low pressure side of the refrigeration plant.
Any company
that is energy conscious is also environmentally conscious. Less energy consumed means less waste fewer emissions and a healthier environment.
Manik Engineer's development in Fully Automatic Gas Purger for Refrgeration Plants have led to countless saving in energy, time and money.
The
Automatic Gas Purger for Refrgeration Plants - Type SGP - 2E efficiently and automatically helps maintaining condensing temperature at nearly optimum operating conditions and reduces the concentration of non-condensable gases to a negligible percentage.
Capacity of Automatic Gas Purger for Refrigeration Plant:
Usually plants operating with a suction pressure above the atmospheric pressure are less inclined to collect non-condensable gases than plants operating with an absolute pressure below 1 bar. However, great quantities of non-condensable gases are often found in both categories of plants. For Ammonia plants with a suction temperature below -35°C, one gas purger is recommended at capacities below 500 kW. For plants with a suction temperature above -35°C one gas purger per 1000 kWis recommended as a minimum.
The capcity of the gas purger will be reduced at high ambient temperatures so it is recommended to insulate the vessel.
|
